Tuneup package for most all Marlin centerfire rifles:
The following upgrades will improve accuracy, reliability, and service life of your gun. After inspecting your gun, I will contact you if there are problems not covered by package.
Premium action job with crisp 3.5-4# trigger using factory parts. All internals deburred and polished as needed. Hammer & sear are properly setup in a precision vise and sear surfaces are ground to perfect form on a surface grinder. All parts are lubed upon reassembly.
Install 1 pc. tuned ejector
All exterior sharp edges removed where needed.
Feeding, extraction, & function checked with several different ammos and adjustments made as needed.
Recrown muzzle with traditional rounded style crown.
Visually inspect bore.
Check fit of forearm and mag tube and adjust as needed. Guns with dovetail hangars and/or mag tube studs will have them permanently silver soldered in place to prevent loosening under recoil.
Glassbed stock to receiver.
Install alloy magazine follower
Fix loose thread fit beween receiver and barrel if needed.
Testfire with at least 3 rounds to test feeding, ejection, and primer strike. Guns are carefully reassembled and loctite used as required on screws.
Reblue as needed.
Stainless or Blue guns $1195
Fedex Ground return shipping included
Options for tuneup package:
Upgrade to Turnbull colorcased receiver, lever, and hammer- $625- blue guns only
Install appropriate for caliber Kick-EEZ recoil pad. Specify LOP- $150
Available in black, brown, red, or orange- specify
Beadblast stainless rifle- $125
Install Ranger Point no flop trigger- $100
Shorten barrel to 16.125" minimum, remount front sight- from $250-price will vary by model
Skinner, XS sights, Ranger Point precision, and rails- POR
Install flush mount dovetail filler- $60
Medium loop levers- Ranger Point- $185
Professional refinish walnut stocks with satin oil finish- $450
Recondition laminated stocks- Remove scratches, minor dents, and buff- $100-$200